Pulp is a fibrous lignocellulosic material prepared by chemically, semi-chemically, or mechanically isolating the cellulose fiber of wood, , Paper recycling, or cotton paper. Mixed with water and other chemicals or plant-based additives, pulp is the major raw material used in papermaking and the industrial production of other paper products.
History
Before the widely acknowledged invention of
papermaking by
Cai Lun in China around AD 105, paper-like writing materials such as
papyrus and
amate were produced by ancient civilizations using plant materials which were largely unprocessed. Strips of bark or
Bast fibre material were woven together, beaten into rough sheets, dried, and polished by hand.
Pulp used in modern and traditional
papermaking is distinguished by the process which produces a finer, more regular slurry of cellulose fibers which are pulled out of solution by a screen and dried to form sheets or rolls.
The earliest paper produced in China consisted of bast fibers from the
Paper mulberry plant along with
hemp rag and net scraps.
By the 6th century, the mulberry tree was domesticated by farmers in China specifically for the purpose of producing pulp to be used in the papermaking process. In addition to mulberry, pulp was also made from
bamboo,
hibiscus bark,
Pteroceltis,
straw, and
cotton.
Papermaking using pulp made from hemp and
linen fibers from tattered clothing, fishing nets and fabric bags spread to Europe in the 13th century, with an ever-increasing use of rags being central to the manufacture and affordability of
rag paper, a factor in the development of
printing.
By the 1800s, production demands on the newly industrialized papermaking and printing industries led to a shift in raw materials, most notably the use of
pulpwood and other tree products which today make up more than 95% of global pulp production.
The use of wood pulp and the invention of automatic in the late 18th- and early 19th-century contributed to paper's status as an inexpensive commodity in modern times.[ Burger, Peter Charles Fenerty and his Paper Invention. Toronto: Peter Burger, 2007. pp.25–30] Chemical processes quickly followed, first with J. Roth's use of sulfurous acid to treat wood, then by Benjamin Tilghman's U.S. patent on the use of calcium bisulfite, Ca(HSO3)2, to pulp wood in 1867.[ History of Paper. indiapapermarket.com] made the kraft process the dominant pulping process, starting in the 1940s.
Global production of wood pulp in 2006 was 175 million tons (160 million tonnes).
Wood pulp
The
timber resources used to make wood pulp are referred to as
pulpwood.
While in theory any tree can be used for pulp-making,
coniferous trees are preferred because the cellulose fibers in the pulp of these species are longer, and therefore make stronger paper.
Some of the most commonly used trees for paper making include
such as
spruce,
pine,
fir,
larch and
Tsuga, and
such as
eucalyptus,
aspen and
birch.
There is also increasing interest in genetically modified tree species (such as GM
eucalyptus and GM
Populus) because of several major benefits these can provide, such as increased ease of breaking down lignin and increased growth rate.
A pulp mill is a manufacturing facility that converts wood chips or other plant fibre source into a thick fiberboard which can be shipped to a paper mill for further processing. Pulp can be manufactured using mechanical, semi-chemical or fully chemical methods (kraft and sulfite processes). The finished product may be either bleached or non-bleached, depending on the customer requirements.
Wood and other plant materials used to make pulp contain three main components (apart from water): cellulose fibers (desired for papermaking), lignin (a three-dimensional polymer that binds the cellulose fibres together) and (shorter branched carbohydrate ). The aim of pulping is to break down the bulk structure of the fibre source, be it chips, stems or other plant parts, into the constituent fibres.
Chemical pulping achieves this by degrading the lignin and hemicellulose into small, water-soluble molecules which can be washed away from the cellulose fibres without Depolymerization the cellulose fibres (chemically depolymerizing the cellulose weakens the fibres). The various mechanical pulping methods, such as groundwood (GW) and refiner mechanical pulping (RMP), physically tear the cellulose fibres one from another. Much of the lignin remains adhering to the fibres. Strength is impaired because the fibres may be cut. There are a number of related hybrid pulping methods that use a combination of chemical and thermal treatment to begin an abbreviated chemical pulping process, followed immediately by a mechanical treatment to separate the fibres. These hybrid methods include thermomechanical pulping, also known as TMP, and chemithermomechanical pulping, also known as CTMP. The chemical and thermal treatments reduce the amount of energy subsequently required by the mechanical treatment, and also reduce the amount of strength loss suffered by the fibres.
+Global pulp production by category (2000) | Pulp category | '''Production M |
| Chemical | 131.2 |
| Kraft | 117.0 |
| Sulfite | 7.0 |
| Semichemical | 7.2 |
| Mechanical | 37.8 |
| Nonwood | 18.0 |
| Total virgin fibres | 187.0 |
| Recovered fibres | 147.0 |
| Total pulp | 334.0 |
Harvesting trees
Most pulp mills use good forest management practices in harvesting trees to ensure that they have a sustainable source of raw materials
citation required. One of the major complaints about harvesting wood for pulp mills is that it reduces the
biodiversity of the harvested forest. Pulp
tree plantations account for 16 percent of world pulp production, old-growth forests 9 percent, and second- and third- and more generation forests account for the rest.
is practiced in most areas, so trees are a renewable resource. The FSC (Forest Stewardship Council), SFI (Sustainable Forestry Initiative), PEFC (Programme for the Endorsement of Forest Certification), and other bodies certify paper made from trees harvested according to guidelines meant to ensure good forestry practices.
The number of trees consumed depends on whether mechanical processes or chemical processes are used. It has been estimated that based on a mixture of and 12 metres (40 ft) tall and 15–20 centimetres (6–8 in) in diameter, it would take an average of 24 trees to produce 0.9 tonne (1 ton) of printing and writing paper, using the kraft process (chemical pulping). Mechanical pulping is about twice as efficient in using trees, since almost all of the wood is used to make fibre, therefore it takes about 12 trees to make 0.9 tonne (1 ton) of mechanical pulp or newsprint.[ Trees Into Paper. Conservatree. Retrieved on 2017-01-09.]
There are roughly two short tons in a cord of wood.
Preparation for pulping
Wood chipping is the act and industry of chipping wood for pulp, but also for other
Wood processing products and
mulch. Only the
heartwood and sapwood are useful for making pulp. Bark contains relatively few useful fibers and is removed and used as fuel to provide steam for use in the pulp mill. Most pulping processes require that the wood be chipped and screened to provide uniform sized chips.
Pulping
There are a number of different processes which can be used to separate the wood fiber:
Mechanical pulp
Manufactured
with embedded
silicon carbide or
aluminum oxide can be used to grind small wood logs called "bolts" to make stone pulp (SGW). If the wood is steamed prior to grinding it is known as pressure ground wood pulp (PGW). Most modern mills use chips rather than logs and ridged metal discs called refiner plates instead of grindstones. If the chips are just ground up with the plates, the pulp is called refiner mechanical pulp (RMP) and if the chips are steamed while being refined the pulp is called thermomechanical pulp (TMP). Steam treatment significantly reduces the total energy needed to make the pulp and decreases the damage (cutting) to fibres. Mechanical pulps are used for products that require less strength, such as
newsprint and
.
Thermomechanical pulp
Thermomechanical pulp is pulp produced by processing
Woodchips using heat (thus "") and a mechanical refining movement (thus "-mechanical"). It is a two-stage process where the logs are first stripped of their bark and converted into small chips. These chips have a moisture content of around 25–30 percent. A mechanical force is applied to the wood chips in a crushing or grinding action which generates heat and water vapour and softens the
lignin thus separating the individual fibres. The pulp is then screened and cleaned, any clumps of fibre are reprocessed. This process gives a high yield of fibre from the
timber (around 95 percent) and as the lignin has not been removed, the fibres are hard and rigid.
Chemi-thermomechanical pulp
Wood chips can be pre-treated with
sodium carbonate,
sodium hydroxide,
sodium sulfate and other chemicals prior to refining with equipment similar to a mechanical mill. The conditions of the chemical treatment are much less vigorous (lower temperature, shorter time, less extreme pH) than in a chemical pulping process since the goal is to make the fibers easier to refine, not to remove lignin as in a fully chemical process. Pulps made using these hybrid processes are known as chemi-thermomechanical pulps (CTMP).
Chemical pulp
Chemical pulp is produced by combining wood chips and chemicals in large vessels called digesters. There, heat and chemicals break down lignin, which binds
cellulose fibres together, without seriously degrading the
. Chemical pulp is used for materials that need to be stronger or combined with mechanical pulps to give a product different characteristics. The
kraft process is the dominant chemical pulping method, with the
sulfite process second. Historically
soda pulping was the first successful chemical pulping method.
Recycled pulp
Recycled pulp is also called
deinked pulp (DIP). DIP is
paper recycling which has been processed by chemicals, thus removing
and other unwanted elements and freed the paper fibres. The process is called
deinking.
DIP is used as raw material in papermaking. Many newsprint, toilet paper and facial tissue grades commonly contain 100 percent deinked pulp and in many other grades, such as lightweight coated for offset and printing and writing papers for office and home use, DIP makes up a substantial proportion of the furnish.
Organosolv pulping
Organosolv pulping uses organic solvents at temperatures above 140 °C to break down lignin and hemicellulose into soluble fragments. The pulping liquor is easily recovered by distillation. The reason for using a solvent is to make the
lignin more soluble in the cooking liquor. Most common used solvents are
methanol,
ethanol,
formic acid and
acetic acid often in combination with
water.
Alternative pulping methods
Research is under way to develop biopulping (biological pulping), similar to chemical pulping but using certain species of
fungus that are able to break down the unwanted lignin, but not the cellulose fibres.
In the biopulping process, the fungal enzyme lignin peroxidase selectively digests lignin to leave remaining cellulose fibres. This could have major environmental benefits in reducing the pollution associated with chemical pulping. The pulp is bleached using
chlorine dioxide stage followed by neutralization and calcium hypochlorite. The
oxidizing agent in either case oxidizes and destroys the dyes formed from the
of the wood and accentuated (reinforced) by
present in it.
Steam exploded fibre is a pulping and extraction technique that has been applied to wood and other fibrous organic material.
Bleaching
The pulp produced up to this point in the process can be bleached to produce a
white paper product. The chemicals used to bleach pulp have been a source of environmental concern, and recently the pulp industry has been using alternatives to
chlorine, such as
chlorine dioxide,
oxygen,
ozone and hydrogen peroxide.
Alternatives to wood pulp
Pulp made from non-wood plant sources or recycled textiles is manufactured today largely as a speciality product for fine-printing and art purposes.
Modern machine- and hand-made art papers made with cotton, linen, hemp,
abaca,
Japanese tissue, and other fibers are often valued for their longer, stronger fibers and their lower
lignin content.
Lignin, present in virtually all plant materials, contributes to the acidification and eventual breakdown of paper products, often characterized by the browning and embrittling of paper with a high lignin content such as
newsprint.
100% cotton or a combination of cotton and linen pulp is widely used to produce documents intended for long-term use, such as certificates, currency, and passports.
Today, some groups advocate using field crop fibre or agricultural residues instead of wood fibre as a more sustainability means of production.
There is enough straw to meet much of North America's book, magazine, catalogue and copy paper needs. Agricultural-based paper does not come from . Some agricultural residue pulps take less time to cook than wood pulps. That means agricultural-based paper uses less energy, less water and fewer chemicals. Pulp made from wheat and flax straw has half the ecological footprint of pulp made from forests.
Hemp paper is a possible replacement, but processing infrastructure, storage costs and the low usability percentage of the plant means it is not a ready substitute.
However, wood is also a renewable resource, with about 90 percent of pulp coming from or reforested areas.[ 造纸企业能入“绿色之门”的前提 南粤大地 南方网. News.southcn.com (2009-07-20). Retrieved on 2017-01-09.]
Nonwovens are in some applications alternatives to paper made from wood pulp, like filter paper or .
+Comparison of typical feedstocks used in pulping |
|
| Carbohydrates | 65–80% | 50–80% |
- – Cellulose
| style="text-align:right;" 40–45%
| 30–45% |
- – Hemicellulose
| style="text-align:right;" 23–35%
| 20–35% |
| Lignin | 20–30% | 10–25% |
| Extractives | 2–5% | 5–15% |
| Proteins | <0.5% | 5–10% |
| Inorganics | 0.1–1% | 0.5–10% |
- – SiO2
| style="text-align:right;" <0.1%
| 0.5–7% |
Market pulp
Market pulp is any variety of pulp that is produced in one location, dried and shipped to another location for further processing.
Important quality parameters for pulp not directly related to the fibres are
brightness, dirt levels, viscosity and ash content. In 2004 it accounted for about 55 million
of market pulp.
[
]
Air dry pulp is the most common form to sell pulp. This is pulp dried to about 10 percent moisture content. It is normally delivered as sheeted bales of 250 kg. The reason to leave 10 percent moisture in the pulp is that this minimizes the fibre to fibre bonding and makes it easier to disperse the pulp in water for further processing to paper.
Roll pulp or reel pulp is the most common delivery form of pulp to non traditional pulp markets. Fluff pulp is normally shipped on rolls (reels). This pulp is dried to 5–6 percent moisture content. At the customer this is going to a comminution process to prepare for further processing.
Some pulps are flash dried. This is done by pressing the pulp to about 50 percent moisture content and then let it fall through that are 15–17 m high. Gas fired hot air is the normal heat source. The temperature is well above the charring of cellulose, but large amount of moisture in the cell wall and lumen prevents the fibres from being incinerated. It is often not dried down to 10 percent moisture (air dry). The bales are not as densely packed as air dry pulp.
Environmental concerns
The major environmental impacts of producing wood pulp come from its impact on forest sources and from its waste products.
Forest resources
The impact of logging to provide the raw material for wood pulp is an area of intense debate. Modern logging practices, using forest management seek to provide a reliable, renewable source of raw materials for . The practice of clear cutting is a particularly sensitive issue since it is a very visible effect of logging. Reforestation, the planting of tree seedlings on logged areas, has also been criticized for decreasing biodiversity because reforested areas are .
Logging of old growth forests accounts for less than 10 percent of wood pulp,
Effluents from pulp mills
The process effluents are treated in a biological effluent treatment plant, which guarantees that the effluents are not toxic in the recipient.
Mechanical pulp is not a major cause for environmental concern since most of the organic material is retained in the pulp, and the chemicals used (hydrogen peroxide and sodium dithionite) produce benign byproducts (water and sodium sulfate (finally), respectively).
Chemical pulp mills, especially kraft mills, are energy self-sufficient and very nearly closed cycle with respect to inorganic chemicals.
Bleaching with chlorine produces large amounts of organochlorine compounds, including polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/Fs).
Odor problems
The kraft pulping reaction in particular releases foul-smelling compounds. The sulfide reagent that degrades lignin structure also causes some demethylation, yielding methanethiol, dimethyl sulfide, and dimethyl disulfide.
Applications
The main applications for pulp are paper and Paperboard production. The furnish of pulps used depends on the quality on the finished paper. Important quality parameters are Pulpwood, brightness, viscosity, extractives, dirt count and strength.
Chemical pulps are used for making nanocellulose.
Speciality pulp grades have many other applications. Dissolving pulp is used in making Viscose that is used Rayon and cellophane production. It is also used to make cellulose derivatives. Fluff pulp is used in , feminine hygiene products and Nonwoven fabric.
Paper production
The Fourdrinier Machine is the basis for most modern papermaking, and it has been used in some variation since its conception. It accomplishes all the steps needed to transform pulp into a final paper product.
Economics
In 2009, NBSK pulp sold for $650/ton in the United States. The price had dropped due to falling demand when newspapers reduced their size, in part, as a result of the recession.
See also
Bibliography
